ACC Decoder Module To Convert To A 2 Wire | HTRADM99

• For use with Hunter ACC controller
• Converts conventional controller to decoder operation
• Used with ICD series decoders

ACC family controllers may be ordered in decoder versions as complete model numbers. Individual decoder output modules (ADM-99) may also be retrofitted to existing controllers, to convert them to decoder operations. However, decoder and conventional output modules may not be installed in the same controller at the same time.

Us the ADM99 Decoder Output Module, to convert existing ACC99D controllers to decoder operation. The ADM-99 is already included already in the ACC99D and the ACC99DP versions. It may be installed in a stock conventional controller, to convert it to decoder operations. It is also used as a replacement component for repair purposes.

• Two-Wire Path Terminals Connect no more than one pair of red and blue wire paths to each output terminals
• Status LEDs Decoder Fault, Module/Line Activity, Communicating, Line Status
• Locking Lugs
• Gold-plated Electrical Contacts
• Programming Port Port where decoder wires get plugged into in order to program the decoder
• Decoder output modules may NOT be mixed with the "conventional" ACM/AGM-600 output modules.
• Decoder output modules are always installed in the first three slots.
• Install the ADM99 by aligning it firmly into the first three station module slots, and sliding straight up until clicks into place. As soon as the ADM99 is slid into place, the Module/Line Activity light will light red for one second, and then the Line Activity light will illuminate green. Unlike the station modules, the ADM99 will illuminate the status lights with the power bar in the "Power Off" position.
• ACC controllers (including decoder variations) are always capable of either 120 VAC or 230 VAC operation and do not require separate versions for international markets.
• Hunter's premium industrial-grade controller for high-performance irrigation control.
• Operates 24 VAC irrigation solenoids or low-draw solid-state relays for specific durations at specific times.
• Can be connected to various sensors, providing automatic shutdown and notification in case of emergencies, and actual flow records and responses in real-time.