For ACC2 Series Modular Conventional Controller Internal Wi-Fi Module | HTRA2CWIFI

• Wi-Fi Module for ACC2
• This equipment has been tested and found to comply
  with the limits for a Class B digital device, pursuant to
  part 15 of the FCC rules.
• ACC2 (not included)

At its core, the ACC2 has a powerful transformer that allows it to safely run up to 14 valves simultaneously, bringing maximum efficiency to large watering schedules. The ACC2 can be configured for any commercial project, from 12 to 54 stations, with up to 6 flow meter inputs, and up to 6 pump/master valve outputs. Its large, full-color backlit display and unique reversible facepack make program setup and diagnostics fast and efficient.

The ACC2 has built-in intelligence, with the ability to schedule stations on up to 6 flow zones simultaneously. It continually monitors the system for breaks, leaks and electrical faults, suspending irrigation and pinpointing the source should problems arise. It can even respond to sensor input with specific actions like switching water supplies when water levels drop, or initiating a program when soil moisture is low, and other creative special applications.

1. Turn off the controller power.

2. Tilt and remove the facepack to access the bottom of the facepack.

3. Remove the dust cover or prior module from the controller facepack. Press the spring-loaded button and pull downward to remove.

4. Insert the new A2C-WIFI module until the lock clicks.

5. Screw the included antenna's connector to the threaded, gold-colored antenna connection. Hand-tighten only.

6. Route the antenna cable through the cable channel on the back of the facepack.

7. Install the plastic antenna holder in one of the unused conduit holes on the bottom of the controller.

8. The antenna must be mounted outside of the metal enclosures with the included housing. Secure the antenna holder with the included plastic nut.