FLOW-CLIK Series For AC-Powered Fixed Wall Mount Controllers Sensor and Module Standard Kit | HTRFLOWCLIK

• Includes Sensor and Interface Module
• Senor Requires FCT for Pipe Installation
• Standard kit for All 24 VAC Controllers

A ruptured pipe or broken sprinkler left undetected can result in substantial damage. Plants and ground cover can be flooded, slopes can be eroded, and hundreds of gallons of water can be wasted. Hunter created the Flow-Clik flow sensor to guard against these damages in the event of a rupture. The Flow-Clik can be programmed at a specified level of flow. It will shut down irrigation if it detects a flow rate higher than the programmed limit. Therefore, the amount of water loss and system damage is substantially reduced in the event of high external leakage. 

• Automatically shuts down entire system if an overflow condition occurs, helping to protect against flood damage and erosion

  Single-button calibration to set highest flow rate

  User-adjustable timing and delay for sensor response

  Compatible with all Hunter AC-powered controllers for a variety of applications

  Multi-color LED indicates system status and if flow is within limits