For Controller Solar Sync Module | HTRSOLARSYNCMOD

• For use with PC, PCC, and I-Core Series, 
• Maximum distance from the sensor to the controller: 200 ft./60 m of wire.
• Two-year manufacturers warranty
• Wiring: 18 AWG/ 0.8 mm or 20 AWG/0.8 mm diameter minimum from the sensor to the module.
• Approved for direct burial and sunlight exposure (UV).

The Solar Sync takes hourly readings and every night at midnight changes the controller Season Adjust to a new value based on recent weather. The current value shown is actually a 3-day rolling average. The controller Start Times and Water Days do not change. Changes only occur to the Seasonal Adjust which in turn changes the station run time.

Note: If you are installing Solar Sync on an ACC or X-Core Controller, the Solar Sync Module is not required. For the ACC or X-Core controllers, the WSSSEN kit should be used, as it does not include the Module.