Rain Bird DV In-Line Valve 1" FPT | RBL100DV

• 1 in. (26/34) standard in-line configuration
• Double-filtered pilot-flow design for maximum reliability
• Balanced-pressure diaphragm for long life

Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against backflow. Check your local city codes to determine what type of valves are required.

• All of our valves work with any standard sprinkler timer
• Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring
• Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream
• 1.25 in. (3,2 cm) stainless steel phillips head screws
• Accepts latching solenoid for use with Rain Bird battery-operated controllers

Valve Size 1 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Valve Series DV/DVF
Operating Temperature Up to 110° F (43° C)
Dimensions

• Height: 4 1/2" (11.4 cm)
• Width: 3 1/3" (8.4 cm)
• Length: 4 3/8" (11.1 cm)

Electrical Specifications

24 VAC 50/60 Hz (cycles per second) solenoid power requirement:

• 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current
• Solenoid coil resistance: 38 Ohms

Flow Range 0.2 to 22 GPM (0,05 to 5,0 m3/h; 0,01 to 1,39 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation® application, use a 200 mesh filter installed upstream
Operating Pressure 15 to 150 psi (1.0 to 10.4 bar)

Warranty 5 years