Sch. 40 PVC Elbow 3/4 in. Slip | 406-007

• Elbow
• 3/4”
• Slip
• Material: PVC
• Schedule 40
• Color White
• Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140°F
• Do not test PVC piping systems with compressed air or gases

Corrosion resistant injection molded PVC pipe fittings, IPS sizes 1/4” through 12” produced to Schedule 40 dimensions, for use at temperatures up to and including 140°F. Pressure rating varies with pipe size and temperature. Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants and halogens. Chemical resistance data must be referenced by the design authority for proper material selection prior to use. Typical applications include potable water, water and waste water treatment, chilled water, irrigation, pool and spa, drainage, agricultural, chemical processing and other applications where corrosive fluids are conveyed.

The materials used in the manufacture of the fittings shall be a Rigid Poly (Vinyl Chloride) (PVC) Type 1 PVC compound having a Cell Classification of 12454 per ASTM D1784 (also formerly known as Type I, Grade I PVC; PVC 1120.) Materials used in the manufacture of these fittings shall meet the health and safety requirements of ANSI/NSF Standard 61 as being safe for use with potable water.