Toro MPR Spray Nozzle 12' w/ Screen Half Circle | 12T-H

• (Featured Bullet 1)
• (Featured Bullet 2)
• (Featured Bullet 3)

Toro MPR Plus nozzles make system design and installation easier than ever. Simply select the needed radius and arc the nozzle does everything else.

Matched Precipitation Rates Ensures all nozzles with a common radii apply water at approximately the same rate.

Pre-installed Pressure Compensation Disc Eliminates excessive misting, conserves water and provides precise flow rates.

• Customized screens for each nozzle
• Fine-mesh snap-in filter screens for lower flow nozzles
• Convenient nozzle packaging nozzles and screens packed separately
• Adjustment screw allows up to 25% reduction in radius and complete shutoff

• Operating pressure range: 20-75 psi
• Recommended operating pressure: 30 psi
• Flow Rate: 0.05 4.58 gpm
• Nozzle trajectory:
• 5: 5 - 8: 10 - 10: 17 - 12: 24 - 15: 28
• Corner and Side Strips: 17
• 8 Flat Spray: 0